eVic VT by Joyetech

eVic VT by Joyetech

Ήρθε το νέο Joyetech eVic VT με 60w, οθόνη LED, 5000mAh.

Το Joyetech eVic VT μαζί με τον eGo ONE Mega VT atomizer, και οθόνη LED, συνδιάζει τη δύναμη με το στύλ. 
Με την τελευταίας γενιάς τεχνολογία ελέγχου θερμοκρασίας, απολαμβάνετε το άτμισμα, στην ποσότητα και γέυση που εσείς επιθυμείτε.

Το Joyetech eVic VT KIT περιλαμβάνει:

1 x eVic VT μπαταρία
1 x Ατμοποιητή eGo ONE mega (με CL-Ni κεφαλή)
1 x Κεφαλή Ατμοποιητή CL-Ti
1 x USB καλώδιο
1 x 1A Προσαρμοστής τοίχου 220v

Presenting the eVic-VT 60W, to go with eGo ONE Mega VT atomizer , with its new cutting edge technology of temperature control, 
embodies the concept of a healthy alternative lifestyle. eVic-VT features a super large OLED screen, supporting VT-Ti (Titanium)/ 
VT-Ni (Nickel)/ VW mode, and battery capacity of 5000mah.

The Variable Temperature (VT) brings out a different flavor experience with the change of temperature settings, not only improving 
the taste,but also saving battery and liquid consumption. eVic-VT is not your typical vape, it’s an evolutionary start.

Product Parameters:
eVic-VT:
Size: 47*25.5*85.6mm
Capacity: 5000mAh
Output mode: VT-Ti/VT-Ni/VW Mode
Temperature Range: 100-315℃/200-600˚F
Output Wattage: VT Mode:1W-60W
VW Mode:1W-50W
Output Voltage: 0.5V-8.0V
Resistance Range: 0.2Ω for CL-Ni head
0.4Ω for CL-Ti head
Color: Racing Yellow, Cool Black, Dazzling WhiteeVic-VT Visual Display:
VT-Ti mode/VT-Ni mode/VW
Wattages/ Voltages
Atomizer Resistance
Battery power/Puff/Time

Control Both Nickel 200(Ni) and Titanium (Ti) Heating Wire

Nickel 200 (Ni,Made in USA) and Titanium (Ti) wires, applied with eGo ONE Mega atomizer, greatly enhance the performance 
of eVic-VT.

Create large vapor

Applied with the Most Advanced Intelligent Temperature Control System

The Variable Temperature (VT) system provides an almost perfect vaping experience with various e-juice through temperature control 
system, and at the same time, it decreases e-juice consumption.

Also, it is economical in battery consumption. When vaping, the wattage will reach to maximum in no time and the device can easily 
sustain in high temperature but with much lower wattage.

Note: The battery consumption in VW mode is one time larger than that in VT mode approximately.

Traditional Advantage of VW function

In VW mode output wattage can be adjusted from 1W to 50W by turning the control knob, right to increase, and left to decrease. 
Holding the control knob to the right or left will make the wattage setting rapidly increase or decrease.
Note:
For Kanthal wire with resistance range 0.25-1.0 ohm, the maximum output wattage on screen is 50W.
For Kanthal Wire with resistance range 0.15-0.24 ohm, the actual maximum output wattage will be limited to be 40W to ensure safer 
operation.

Joyetech’s Unique Vaping Record System

eVic-VT can record your vapor Time and Puff automatically.
 In Time or Puff mode (flashing), long press the fire button to eliminate records of each.

Charging

Simply charge eVic-VT by connecting it with a computer or a wall adapter via USB cable.

It takes 6 hours to be fully charged. When Charging in device-on condition, the battery sign flashes; 
when it is fully charged, the battery sign disappears.

How to Change Atomizer Head

Unscrew the atomizer base from the tank.
Unscrew the atomizer head and remove from the atomizer base. 
Screw the new CL atomizer head into the atomizer base and firmly tighten. 
Refit the atomizer base into the tank. Connect the assembled atomizer to the battery and the eVic-VT is ready to use.